This table shows the current ANI parameters for all bands and radio channels.
Note: If adaptive noise immunity is disabled, the table contains either the default values after the initialization of the WLAN interface or the manually preset values.
- Telnet path:
- Band
- Indicates the radio band on which the access point is measuring the current parameters. Possible values are:
- 2.4 GHz
- 5 GHz
- Radio channel
- Displays the radio channels available in the corresponding band.
- Interface
- Indicates the WLAN interface on which the access point is measuring the current parameters.
- Age
- Indicates the age of the measurement.
- Noise immunity level
- Shows the level of noise immunity. The higher the value, the more "immune" the access point is to interference. The range of values depends on the radio module being used.
- Spurious immunity level
- Parameter for internal use by the WLAN module.
- Fir step level
- Parameter for internal use by the WLAN module.
- OFDM weak signal detection
- Parameter for internal use by the WLAN module.
- CCK weak signal detection threshold
- Parameter for internal use by the WLAN module.
- MRC-CCK
- Parameter for internal use by the WLAN module.
The range of values for the individual measurements depends on the radio module being used. Information about which radio module is installed in your device is displayed in the status menu
.Radio module chipset | Noise immunity | OFDM weak signal detection | CCK weak signal detection threshold | Fir step level | Spurious immunity | MRC-CCK |
---|---|---|---|---|---|---|
AR5212/5213/2414/5414 | 0 to 4 | 0, 1 | 0, 1 | 0 to 3 | 0 to 7 | Blank |
AR9160/9280 | 0 to 4 | 0, 1 | 0, 1 | 0 to 3 | 0 to 7 | Blank |
AR9380/9382/9390 | Blank | 0, 1 | 0, 1 | 0 to 8 | 0 to 7 | 0, 1 |