To register a new Public Spot user, simply enter the following URL:
http://<deviceURL>/cmdpbspotuser/ ?action=addpbspotuser¶meter1=value1¶meter2=value2&...
The following parameters are available:
- comment
- Comment on the registered user
-
If it is possible to enter multiple comments for a Public Spot user, you can enter the comments and their corresponding comment-field names as follows:
&comment=<Content1>:<FieldName1>;<Content2>:<FieldName2>;...;<Content5>:<FeildName5>
If there is just one comment field per user, then the comment is entered as follows:&comment=<Comment>
Note: Special characters such as German umlauts are not supported.Note: The maximum number of characters for the comment parameter is 191 characters. - Automatic print-out of the voucher.
- If this parameter is omitted, the wizard displays a button that you can use to print the voucher.
- printcomment
- Print the comment on the voucher.
- If this parameter is omitted, no comment will appear on the voucher (default setting).
- nbGuests
- Number of Public Spot users to be created.
- If this parameter is omitted, the wizard creates one user only (default setting).
- defaults
- Use default values
- The wizard replaces missing or incorrect parameters with default values.
- expiretype
- Combined output of expiry type and validity period of the voucher.
- Specify this parameter as follows:
&expiretype=<Value1>+validper=<Value2>
The parameter values have the following meaning:- Value1: Expiry type (absolute, relative, absolute and relative, none)
- Value2: Voucher validity period
- If these parameters are omitted or set with incorrect values the wizard will apply the default values.
- ssid
- Network name
- If this parameter is omitted, the wizard uses the default network name (default setting).
- unit
- Access time
- Specify this parameter as follows:
&unit=<Value1>+runtime=<Value2>
The parameter values have the following meaning:- Value1: LIfetime units. Possible values are: Minute, hour, day
- Value2: Duration
- timebudget
- Time budget
- If this parameter is omitted, the wizard uses the default value.
- volumebudget
- Volume budget
- If this parameter is omitted, the wizard uses the default value.
- multilogin
- Multiple logins
- If you specify this parameter, the user can login multiple times with his/her user account. If this parameter is missing, multiple logins are disabled by default.
- maxconclogin
- Maximum number of concurrent logins
- With this parameter you specify with how many different end devices a user can login to a Public Spot. Valid entries are integers such as 0, 1, 2, ....
- If this parameter is missing or if the parameter has the value 0, this means that the number of devices is unlimited.Note: This parameter requires that multiple logins be enabled. Setting this parameter in isolation has no other effects.
- casesensitive
- User name case-sensitive:
- If you enter this parameter, the Public Spot user must pay attention to capitalization when entering the user name at login. Valid values are:
-
- 0: Case-sensitive username is disabled
- 1: Case-sensitive username is enabled
- bandwidthprof
- Bandwidth profile
- With this parameter you assign a pre-defined bandwidth profile to a Public Spot user. Enter the valid value for this parameter as the line number of an existing profile name under
&bandwidthprof=1
to index the first entry in the table.
, such as - If this parameter is missing or the line number is invalid (for example, the table is empty), the wizard does not limit the bandwidth.
Note: If the Public Spot administration contains no default values to replace missing parameters, the wizard opens a dialog. Enter the missing values here.