If using a terminal program, you should first select the 'set mode-firmsafe' command on the 'Firmware' menu and select the mode in which you want the new firmware to be loaded (immediately, login or manually). If desired, you can also set the time period of the firmware test under 'set Timeout-firmsafe'.
Select the 'do Firmware-upload' command to prepare the router to receive the upload. Now begin the upload procedure from your terminal program:
- If you are using Telix, click on the Upload button, specify 'XModem' for the transfer and select the desired file for the upload.
- If you are using Hyperterminal, click on Transfer/ Send File, select the file, specify 'XModem' as the protocol and start the transfer with OK.
Note: The firmware upload over a terminal program is only possible over a serial
configuration interface.