When configuring the RADIUS server, a definition is needed of which authenticator can access the RADIUS server, the password required for this access, and the open port that is to be used to communicate with the RADIUS server. The authentication port applies globally for all authenticators.
LANconfig: WLAN security / RADIUS
WEBconfig: LCOS menu tree / Setup / Radius / Server
- Authentication port [default: 0] Specify here the port used by the authenticators to communicate with the RADIUS server in the LANCOM access point. Port '1812' is normally used. Port '0' disables the RADIUS server.
In addition to the port, 16 authenticators that are allowed to communicate with the RADIUS server may be entered here. Entries are made in the corresponding table and with the following parameters:
- IP address IP address of the authenticator which may communicate with the RADIUS server in the LANCOM access point.
- Secret
Password required by the authenticator for access to the RADIUS server
in the LANCOM access point.
Note: In addition to the configuration of the RADIUS server, the client information source must also be defined .