Specify the continuation time of the automatically generated P2P configuration.
The continuation time mentioned above refers to the lifetime of any P2P link if the AP loses the CAPWAP connection to the WLC. If the AP detects a loss of the CAPWAP connection, it attempts to reconnect within the specified continuation time. Connections to P2P partners and associated WLAN clients remain intact during these times. If the recovery fails and the continuation time expires, the AP discards this part of the WLC configuration. If the standalone continuation time is set to 0, the AP immediately discards this part of the configuration.
Next, the device uses the remaining configuration parts—the SSID of the AutoWDS base network, the related WPA2 passphrase, and the timeout periods for the preconfigured and express integrations—as a basis to count down the 2.37.1.15.15 Time-till-Preconf-Scan until the start of the automatic (re-)configuration for the preconfigured integration.
- SNMP ID:
- 2.37.1.15.14
- Console path:
- Setup > WLAN-Management > AP-Configuration > AutoWDS-Profiles
- Possible values:
0 … 9999 Minutes
- Special values:
- 0
- The AP immediately switches off its physical WLAN interface(s) as soon as contact to the WLC is lost. The device immediately deletes its configuration parameters so that the WLC must re-transmit them when reestablishing the connecting.
- Select this setting to protect the configuration parameters that are relevant for security from unauthorized access and misuse (e.g., in case the AP is stolen).
- 9999
- The configuration parameters are permanently stored in the device. The AP continues to operate regardless how long the contact to the WLC is lost.
- Default:
- 0
